ciwg_CEO@906
Dec, 09, 2022

3 Simple Steps For Air Conditioning Repair

Air conditioner repair in Lake City, FL, could cost a lot of money if minor repairs are not done on time. However, you can try troubleshooting your system before calling a professional. Many times, the issue may be easy to solve.

3 Simple AC repair Tips

Before calling an expert for AC repair in Lake City, FL, homeowners are advised to try these suggestions. Naturally, some aspects of your air conditioner repair will require an experienced and skilled service provider. Professionals must handle things like adding freon or electrical repairs. Some simple tips are:

Thermostat Calibration Issue

If you’re still using the dial-type thermostats of the past and they’re not properly calibrated, it could mean that your air conditioner doesn’t receive proper commands from your control unit. This issue is relatively simple to fix by replacing or calibrating your thermostats. 

If you’ve got new programmable thermostats, they may be programmed incorrectly. If you are using the original manual, review the instructions to ensure that your thermostat settings are correct.

Replace Or Clean The Air Filter

The air filter defines the amount of air that enters the home. If your air conditioner isn’t cooling as well as it did in the past, the filter could be dirty and blocked. This blockage affects the flow of air and can make the airflow freeze up, affecting your system’s cooling performance.

This problem can be avoided by regular cleaning or replacement of filters. There is no need for specialized expertise to set up new filters. You can perform this yourself. Make sure the filters you’re about to purchase are top-quality, durable, and long-lasting.

Our AC repair experts in Lake City, FL, generally recommend renewal of the air filter every 60-90 days. The AC unit will cool faster and stop dirt and other allergens from contaminating your air.

Cleaning The Evaporator Coil

The evaporator of the central air system is situated just above the furnace in the plenum. The evaporator might remain hidden; however, it should be cleaned yearly. If the plenum is a sealed metal sheet, Do not try to unzip it. If the plenum is wrapped in foil insulation in its front, you can clean the evaporator. 

Take off the foil-wrapped insulation in front of the plenum. Be careful when removing the tape, as you’ll need to replace it in the future. The insulation behind it is an access plate secured by several screws. Take the screws off and remove the plate. Clean the underside of the evaporator unit using a stiff brush. 

Clean the tray under the evaporator unit. The tray is used to remove condensation from the evaporator. Set the unit back up, reinstall the plate and restart the air conditioner.

If you’re not in a position to tackle it on your own or have tried the troubleshooting or repair procedures but have not been able to fix your AC, contact the professionals at Lane Heating and Air. Call us at (386) 466-7514 or email us to book an appointment for air conditioner repair in Lake City, FL.

Read More
ciwg_CEO@906
Nov, 12, 2022

Troubleshooting Your Heat Pump Issues

Heat pumps are one of the best and most energy-efficient HVAC units that anyone can bring to their home. Although heat pumps are easy to maintain, repairing a malfunctioning heat pump can be expensive.

For a heat pump repair technician in Lake City, FL contact Lane Heating and Air.

Six Heat Pump Issues and Quick Solutions to Resolve Them!

Our HVAC experts have listed all the problems the heat pump system might be struggling with and mentioned the solution to fix the issue.

Below are the heat pump problems:

  • The Heat Pump Runs Constantly

If you feel like the heat pump’s compressor runs continuously to maintain the temperature but fails to preserve comfort, the heat pump is struggling with continuous cycling. You can try replacing the air filter, checking the thermostat settings, and cleaning the condenser coils.

However, if the problem persists, you should contact our heat pump repair technician in Lake City, FL, because the compressor contractor may be damaged or there is refrigerant leakage.

  • The Heat Pump is Not Working

The first thing you should look for is a tripped circuit breaker if your heat pump is not working. It happens due to improper thermostat settings or someone turning off one of the furnace switches in the basement. Technician assistance is needed if there is a faulty capacitor or reversing valve.

  • Frozen Outdoor Unit

The coils in the outdoor unit start to freeze when there is excess dust on the condenser coils. It is best to clean the coils weekly with a mild coil cleaning agent or scrub off the dust with dish cleaning soap. It can also be due to dirty filters or a problem with defrosting function in the worst case.

  • The Indoor Unit is Not Working

If the outdoor unit is working but you cannot feel the cool or warm air blowing through the indoor unit, you need to call our furnace installation experts in Lake City, FL, for a quick check. It is probably due to a tripped circuit breaker, wiring issues, or a faulty blown motor.

  • Malfunctioning Reversing Valve

The reversing valve helps switch the heat pump mode from heating to cooling and vice versa. However, if there are issues with the reversing valve, the heat pump might not switch and work as wished. It is best to contact our heat pump technician to fix the problem.

  • Water Leakage

Water leakage is due to blockage in the condensate drain, and you can remove the blockage with a long brush. Pour a pan of hot water through the pipe to clean it thoroughly. If you hear a hissing noise, contact us for furnace installation in Lake City, FL, because it might be due to refrigerant leakage.

Summary

If you have applied all the DIY quick fixes to resolve the issue, but the issue persists, it is better to call our HVAC technician to inspect the system. They will quickly analyze the problem and think of an effective solution to fix it.

If you are looking for a heat pump repair technician in Lake City, FL, who will cater to your HVAC needs and resolve the problems, you can contact Lane Heating and Air! Our technicians have expertise and years of experience in fixing malfunctioning heat pumps. Call (386) 466-7514 or mail and schedule an appointment with our expert.

Read More
ciwg_CEO@906
Oct, 07, 2022

Can A Heat Pump Heat A Whole House?

A heat pump is a central air HVAC system that can provide you with cold air in the summer and warm air in the winter. This appliance uses electricity to take heat from a cooler space to a warm space, making the cool space cooler and the warm space warmer. Because they transfer heat rather than generate heat, heat pumps can provide comfortable temperatures for your home.

If you reside in Lake City, FL and are searching for heat pump installation, look no further than Lane Heating and Air for assistance. 

Can a heat pump heat the entire house?

Follow the below-mentioned rules to heat your entire house.

  • Choose the Correct Heat Pump

There are three kinds of heat pumps available in the market, and these are:

  1. Air-source heat pump
  2. Water source heat pump
  3. Geothermal heat pump

Among these, the air-source heat pump is the most commonly used system to make your whole house warm in the cold season. It transfers heat between your home and the outside air to balance indoor temperature. Apart from this, a heat pump can reduce electricity consumption at a greater rate.

  • Selecting the Ideal Size Heat Pump

After choosing the heat pump type, you must ensure that your house is installed with the right-sized heat pump. That is where the need for an expert technician arises. You must understand that this work is more related to technical aspects.

Our experts will then take measurements of your house, check the energy requirement, the weather condition in your area, etc. After analyzing all these, you should select a system with the supervision of our HVAC service team.

  • The Installation Process has to Be Perfect

Whether or not a heat pump can heat your whole house depends greatly on the installation process. The installation process can be successful when you have hired the most experienced and professional HVAC service team.

If you happen to live in Lake City, FL and are searching for heat pump installation, look no further than Lane Heating and Air for assistance.

  • Impeccable Insulation for your Home

Insulation is a process that enables your house to hold the inside temperature as much as possible. If your house is not insulated adequately, your system will lose energy and experience discomfort. You must ensure that the technicians insulate your house, i.e., from doors and windows to every corner.

  • Incorporation of the Inverter Technology

According to our specialists, the system can heat your entire house with heat pump inverter technology. When a conventional fails because of extreme weather conditions, a heat pump propelled with inverter technology can serve you better.

Summary

If you want your pump to work effortlessly to heat your whole house, consider the above-given ways to install the system perfectly. Let us share the details of a reliable service provider, i.e., Lane Heating and Air, specialising in heat pump repair service in Lake City, FL,

We at Lane Heating and Air are known for our impeccable services. Our experts will analyze all your system-related issues. We will ensure that each client is satisfied with our service. Please let us know how we can help you by dialing (386) 466-7514. 

Read More