ciwg_CEO@906
Feb, 20, 2022

Why Did Your Furnace Fail To Function?

If you face frequent furnace failures, check for the following parts before contacting your technician that provides heat pump repair services in Lake City, FL, for repair:

Air Filters

Air filters ensure that the airflow path is smooth and does not have any restrictions or cloggings that block it. Moreover, they filter out the foreign matter in your indoor air like bacteria, dust, virus, dirt, pollen, and pet hair to maintain its quality.

If you notice that your family members are suddenly facing increased breathing problems or the airflow feels obstructed, you should check the air filters of your furnace. Ensure that they are clean and do not have any unwanted growth on them.

Thermostat

As a furnace owner, you know the importance of a thermostat and the effects of a malfunctioning thermostat. Before you blame your furnace for lower efficiency levels or not switching on, check your thermostat.

Ensure that the thermostat is on the right mode and its batteries are not dead. Also, look out for any fault in its wirings that may hamper its working. If your thermasrat is not working to the best of its ability and you don’t wan’t to go through the hassle of fixing it on your own,you can contact your technician that provides heat pump installation services in Lake City, FL, to get a smart thermostat.

Pilot Light

A furnace generates heat by burning the fuel that reaches the system, and a furnace burns the fuel with the help of its pilot light. When the system senses that enough fuel has entered, the pilot light burns it to generate heat that circulates through the house.

If the pilot light malfunctions, the furnace will not generate any heat irrespective of its current condition. You can find the pilot light below the furnace, and it burns continuously. If it is not burning, press and hold the Reset button and use a long-neck lighter to relight it.

Blower Motor

The blower motor circulates the warm air throughout your home and ensures there are no hot and cold pockets. If the blower motor malfunctions, your home will remain cold even if the pilot light and thermostat work efficiently.

Blower motors often face wear and tear due to years of working. The best way to keep it in its best working condition is to regularly clean your ducts and schedule regular furnace tune-ups to keep the blower motor in check.

Wiring

You can change most of the components in a furnace, but you cannot replace its whole wiring network. Any fault or broken connections in the wiring can lead to a permanent breakdown of the system.

Improper wiring can cause problems like a tripped breaker, breakdown, and burning smell. You should contact a technician when your furnace faces problems due to wiring issues instead of tackling them on your own.

Lane Heating and Air, LLC is happy to help you with various furnace issues, ranging from a simple tune-up to a typical replacement. You can contact our customer care desk at (386) 466-7514 to know more about heat pump contractors in Lake City, FL.

Read More
ciwg_CEO@906
Feb, 10, 2022

Top 5 Reasons Why Seasonal Heating Maintenance Is Important

Sometimes owners often overlook giving their household’s heating and cooling system much-needed maintenance service. A properly functioning heating system is no guarantee of energy-efficient and smooth operation throughout the winter season. Like every other machine in your household, a heating system, whether a furnace or a heat pump, requires at least one maintenance service before an intended period of use. The number of maintenance services may also vary with the appliance’s location, use, and air quality.

To help our customers understand the significance of a seasonal heating maintenance service, we have put together a list of a few common benefits below.

1. Energy-Efficient Operation

A heating system that receives routine services from a trusted Heat Pump Contractor Lake City FL is bound to be more energy-efficient than ones that don’t. This is because such maintenance services ensure that any element that might pose an impediment to the appliance’s operation is taken care of right away. Whether it is a clogged air filter, soot-ridden heat exchanger, leaky ducts, or gas supply issues in furnaces, a thorough maintenance service resolves all such issues and alerts owners of impending failures.

2. Improved Performance and Air Quality

With every minor and major hindrance being cleared out of the way, any heating appliance finds it easier to perform and provide the same level of heating without having to work too hard. A heating system that receives a dedicated maintenance service not only calls for fewer thermostat adjustments but also eradicates the chances of getting a tune-up or heating assistance such as an electric heating strip in the case of a heat pump.

3. Increase in the Shelf Life of the Equipment

All HVACs are expected to have a shelf life of about 10-15 years. Some HVACs may even be viable to run for 20 years but not without an exemplary record of maintenance services. During its years of operation, a heating system experiences any mechanical wear and tear which is part of the operation and is completely normal. Such wear and tear can be controlled or even delayed with regular maintenance services and care, thus postponing a new Heat Pump Installation Lake City FL.

4. Fewer Breakdowns and Repairs

A routine maintenance service keeps operational anomalies such as short cycling, loud noises, poor air quality, no hot air blowing registers, etc. at bay. Technicians estimate the degree of wear and tear and make repairs accordingly to prevent any sudden breakdowns. However, as your heating system ages, it becomes more susceptible to breakdowns and subsequent repairs. Such Heat Pump Repair Lake City FL, overtime, may cost owners a lot of money and time. A maintenance service prevents such breakdowns as the appliance ages.

5. Ensures Safe Operation

A maintenance service also includes numerous safety checks to ensure faulty wiring, a leak in the gas supply, or any other faulty internal component is resolved. Sometimes even a minor leak in the pipelines or a wiring misconnection can lead to catastrophic safety mishaps.

Lane Heating and Air, LLC is a reliable and professional HVAC service provider in Lake City, FL. Our technicians are skilled and equipped to perform a seamless service any time of the day or night. Call us today at 386-466-7514 to schedule a service visit in Lake City, FL and surrounding areas.

Read More
ciwg_CEO@906
Jan, 25, 2022

Tips To Clean Evaporator Coil Without Removing?

As Florida is a generically warm region, your AC must remain in optimal shape to counter the heat. You cannot just leave it to be and then expect it to cool your house on a whim. HVAC units require special care and special attention. With the way they function, it is no wonder that they get dirty very soon. However, finding the right methods to clean them is upon us. And also, keep the units overall efficient.

An extremely crucial component of your AC, the evaporator coil gets dirty quickly. It takes the hot air from your house and uses the condenser to send it out. However, it also takes in the dust and dirt from the air in doing so. This can lead to becoming dirty and a stark difference in efficiency level. So, it is necessary to find an AC maintenance, Lake City, FL team that offers maintenance of your AC at a reasonable cost. But let’s focus on the evaporator coil for now.

What are the Impacts of a Dirty Evaporator Coil?

Dirty evaporator coils can have various adverse effects on your AC. Some of them are:

  • Normal Wear and Tear: As your evaporator coil will suffer as it is dirty, this will pressure other components to compensate for the evaporator coil. Components that work harder are subject to wear and tear.

This can lead to failing parts and high repair costs. If this happens, you need to contact an air conditioner repair, Lake City, FL team to help you repair. However, that is if you live in Florida!

  • Decreased Life Expectancy: As the different parts get worn out sooner than expected, this will lead to repairs or replacement. Too many repairs can reduce your AC’s life expectancy, and it might be over in a couple of years before the stipulated time.
  • Reduced Airflow in the House: As the evaporator coil will take in lesser air due to the dirt, it will circulate lesser air. This will lead to less efficient cooling and affect the AC’s performance. Hence, it might take a lot of time for your room to cool.
How to Clean your Evaporator Coil Without Removing It?

You can clean your evaporator coil easily, but it is still advisable to approach a professional. You might need a few tools for this process, but not altogether hard to arrange. To clean your evaporator coil, you need to:

  • Read the manual. And then, remove the access panel using the required hardware. This leaves the evaporator coil exposed for simplicity.
  • Set the access panel aside, and put all the screws together in one place for convenience. This is so that you do not lose them and can easily fasten the access panel back on.
  • After this, use compressed air to blow the dirt. Use it at an angle so that the dirt goes inside the coil, and then use the compressed air to push it out.

However, if you ever need professional assistance for AC repair, Lake City FL, contact Lane Heating and Air for a professional experience. Reach out to us on (386) 466-7514 or visit Lane Heating and Air’s website for further details!

Read More