Category: Blog

Whenever you turn on the air conditioner, it does not keep working for hours but drops the room temperature to the desired setting and stays like that for some time. This cycle keeps repeating for the amount of time you decide to keep your air conditioner switched on. There are a few other things that determine how long you should be keeping the air conditioner on.

Normal Air Conditioner Runtime

The runtime is usually low when the summer hasn’t taken its complete form, and you have a properly efficient working air conditioner. Let us get to know some other factors that impact the system and its applications.

• Air Conditioner Size

A bigger unit increases the amount of work done per minute. Hence the runtime is lower than a smaller unit. You can also consider this according to your room or house size. If you are using an air conditioner in a smaller room, even a small unit will work in a shorter duration of time. Consider 20 minutes. We don’t recommend using such air conditioners for larger spaces because it stresses out the cooling mechanism.

• AC State

Just like every other appliance, your air conditioner also deteriorates with each passing year. To keep it working efficiently, you have to call for professional maintenance services. Lane Heating and Air can help you with those. But once it has reached a state where repairing is not an option anymore, it will take at least an hour for your room temperature to fall. This is all that neglect piled up over the years, along with the dirt on filters, which hindrances cool airflow.

• Thermostat Settings

Sometimes homeowners like the room temperature to fall slowly rather than having an abrupt cooling effect. They usually set thermostat settings a few degrees lower than the actual weather temperature. Although it takes some time for your cooling system to maintain that temperature throughout, it is highly recommended. This way, your AC remains healthy, and you even save a lot on electricity.

• Insulation

Homeowners and technicians take care of the insulation needs whenever the system is installed. But the quality of insulation might depreciate over the years, and if it is not done properly, it takes more time for your heating unit to work efficiently. Spend only once by investing in good quality insulation rather than spending again and again on repairs and power bills.

Save On Hours And Maintenance With Lane Heating and Air

If you are still unsure about what to do with your AC unit and live in Florida, Lane Heating and Air is just the right choice for you. We serve all sorts of clients from residential, commercial, rural, and have a whole range of services centered around heat pumps, ductless AC, furnaces, ventilation, thermostats, water heaters, air purifiers, and air conditioner repair in Lake City, Florida.

With a 24/7 helpline and an easy-to-use inbuilt SEER calculator, we are ready to troubleshoot all your heating and air problems.

It’s time to stop relying on people in the same boat as you and get help from professionals. Lane Heating and Air makes sure to deliver every time, for all sorts of problems regarding air conditioner service in lake city, FL. So, what are you waiting for? Schedule an appointment with us today at 386-466-7514!

If you have purchased a new air conditioner, one of the first things you need to consider during AC installation in Lake City, FL, is placement. The right location can boost your air conditioner’s performance, maintaining the indoor temperature at optimal costs.

If you plan to install the outdoor condenser where the last one was, then stop right there. That is the sort of thinking that leads to homeowners making AC placement mistakes with far-reaching consequences. So, try taking your time to understand why condenser placement is so important and the factors you need to consider to ensure long-lasting AC performance.

Why Is It Vital To Understand Condenser Placement?

Well, think of the condenser as your indoor unit’s best friend. One cannot function efficiently without the other. While the indoor AC unit removes heat from inside your home, the outdoor condenser takes care of expelling the heat to the outside air.

It may seem very tempting to place your AC condenser where it’s inconspicuous, such as an attic, basement, garage, or crawl space. However, the condenser cannot do its job effectively if it is not in the correct location outside your home. Here is why:

• Air supply
  The condenser requires enough air supply to help it cool the refrigerant and continue working.
• Airflow
  Apart from the adequate air supply, a condenser requires unobstructed airflow. Therefore, make sure to leave at least two feet between the condenser and other obstructions.
• Heat
  If the condenser is outside, it has enough space to release heat. However, placing a condenser unit indoors causes the air around it to heat up, which reduces the overall effectiveness of the AC.

Other Critical Factors To Consider For Condenser Placement

• Strong Wind

Extreme weather with strong winds can knock over the condenser unit or clog it with debris, damaging the delicate condenser fins. Try placing wind barriers, like a fence, to reduce wind impact.

• Flooding

Prolonged exposure to standing water can negatively affect your condenser as it encourages corrosion. It can also damage the electrical wiring within the condenser. Consider setting up a drainage system around your condenser to carry water away from the unit or placing it on higher ground.

• Heating Sources

While a little sunny spot will not necessarily disrupt a condenser’s ability to cool your home, extreme heat can make it work harder to expel air gathered by the AC. Therefore, place the unit under a shaded area to help the unit function more effectively.

• Stability

The condenser motor emits vibrations when it runs. If you place the condenser on uneven, soft, or weak ground, the vibrations can displace the unit, leading to damages and excessive noise. Choose or build a stable, hard surface to install your outdoor condenser.

Get More Advice At Franks And Lane

If you are still unsure where to install your condenser unit, talk to one of our professionals. As certified experts, we can evaluate your yard and choose the best place to place your outdoor unit. Whether installation or AC maintenance in Lake City, FL, we are available 24/7 to take your calls on (386)466-7514.

If your heat pump doesn’t turn on, it is relatively common and can easily be fixed. Nonetheless, because many homeowners do not know how to fix it, they end up calling professional experts to overhaul issues that they could have fixed themselves. For instance, some problems that homeowners can easily fix include:

• A thermostat that was not set appropriately
• An emergency switch that is turned off
• A blown fuse in the electrical panel box
• A tripped or switched off a circuit breaker
• A tripped outdoor reset toggle

How Much Time Does it Take for a Heat Pump to Reset?

You can reset the unit by turning it off with the thermostat or circuit breaker. After some time, turn it on again. It can take up to 15 minutes for the outdoor system to restart.

How Do You Reset Your Heat Pump?

Resetting a heat pump can be both a simple and difficult task based on what is causing the problem. You can either reset your heat pump on your own or seek the assistance of an HVAC expert. You can also make a service call to the manufacturer for the best heat pump repair in Lake City, FL.

To reset the heat pump, you can follow the steps given below:

1. Check the thermostat and turn it OFF

If you have to reset your heat pump because it keeps running off or doesn’t execute the desired function, resetting the thermostat is the best option. The first step is to see the settings on the thermostat and adjust them.

A heat pump serves two main objectives – to warm up your residence or cool your space. In case of warming or heating, check if the thermostat is set to heating and cooling modes. Adjust the thermostat to regulate the desired functionality. If still, it doesn’t work out, contact a heat pump repair in Lake City, FL.

2. Check the power supply and turn the power switch OFF

If your heat pump is not functioning properly, you can check if it has an adequate power supply. Maybe someone might have switched off the power switch, impeding the power supply to the heat pump.

Heat pumps come with various circuit breakers to regulate the power supply. There are two breakers. One of them is for the condenser and another for the air handler. The two breakers should be on, and if they are not, you must turn them on.

3. Turn OFF the two circuit breakers

Now, you have switched off the thermostat and the power switch. Turn off the circuit breakers on the air handler and the condenser and wait for a few minutes before carrying out the next step.

Are you looking for an HVAC service in Lake City, FL. Look no further than Lane Heating and Air, LLC? To book our expert and affordable HVAC services, you can call us now at (386) 466-7514.